Specifications
Pack Size: 4
Unit Product Weight: 0.3 lbs
Features and Benefits
- SAFER THAN PINS - no more pinpricks for baby or parent!!
- RELIABLE - a snug fitting diaper to prevent those dreaded leaks
- DURABLE - no snaps that can become brittle/rust, nor any velcro to catch all the lint in the wash!!
- ECONOMICAL
- EASY to use
Snappi Baby is committed to reducing its Carbon Footprint by:distributing products that are re-usable and promote a lifestyle of re-use i.e. CLOTH DIAPERING. We also reuse shipping boxes and packaging material where possible reduce packaging of our products as far as possible while maintaining responsible and informative labeling follow a recycle process within our company by recycling damaged shipping boxes, used paper, plastic and technology items
Materials
The Snappi fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane. It is made in South Africa. Directions
1. STRETCH the Snappi fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size, and in so doing, will pull the diaper together to the middle to allow for a snug fit. This is essential for the Snappi to work properly. This can be done by holding the Snappi in the center with one hand, and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi is now ready to go!2. Make sure that the Snappi is ATTACHED SECURELY. It is important that the Snappi 'leg' being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi, hold onto the solid part of the tab. DO NOT pull on the loops. So,Hook Left, Stretch ACROSS and Hook Right, Stretch DOWN and Hook Center.
When not in use: fold the loop over the back of the Snappi end to fit over the teeth of the white grip - see photo above. This acts as a barrier and prevents the sharp teeth from being exposed. These loops are NOT to be pulled on when attaching the Snappi fastener to the diapers. When attaching the Snappi, hold onto the solid part of the tab.
Warnings
WARNING:1. ALWAYS use a cover when using a Snappi fastener with your baby's diaper. 2. Keep out of children's reach when not in use! 3. Do NOT use a Snappi fastener on toddlers that have the ability to undo their cover and take off their diaper and/or clothes. 4. Do not use your Snappi for longer than 6 months. 5. Do not leave your Snappi lying in the sun as it is not UV resistant and can reduce the effectiveness of the Snappi. Any tear in the Snappi can lead to separation of a piece, presenting a possible choking hazard. Do not cut your Snappi as this could create weak spots in your Snappi. Do not pull on the side strips of the Snappi when attaching it, as this can cause them to break. These strips serve as a safety feature only, as explained above. Use the flat tabs for leverage. Inspect your Snappi before each use and discontinue use immediately if there is any sign of cracking, tearing, breakage or wear of the teeth or any other parts.
Safety Requirements
This product is designed to be operated BY persons OVER the age of 12. $5 flat shipping!
* free over $49
* free over $49
simple returns
share this product:
